BXXMR - III SI CARTRIDGE (BLACK)

  • MSDS: BXXMR
  • Manufacturer: AMERICAN LASER INC
  • Product Name: III SI CARTRIDGE (BLACK)
  • National Stock Number: 6850-01-343-6998
Product Identification

Product ID:III SI CARTRIDGE (BLACK)
MSDS Date:05/12/1995
FSC:6850
NIIN:01-343-6998
MSDS Number: BXXMR

Responsible Party
AMERICAN LASER INC
1007 RIPLEY ST
SILVER SPRING, MD 20910
US

Emergency Phone: 301-588-4850

Info Phone: 301-588-4850

Cage: 0S0F8

Contractor
AMERICAN LASER INC
SILVER SPRING, MD 20910 US

Telephone: 301-588-4850

Cage: 0S0F8

Ingredients

STYRENE ACRYLATE COPOLYMER

Fraction By Weight: 55-65%


IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 30-40%


SALICYLIC ACID CHROMIIUM CHELATE

CAS: 72869-85-3

Fraction By Weight: 1-3%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT-NO SPECIFIC HAZARD IS
KNOWN TO AMERICAN LASER. HOWEVER, ANY MATERIAL THAT CONTACTS THE
EYE MAY BE IRRITATING. SKIN-LOW HAZARD FOR INDUSTRIAL HANDLING. NO
DATA AVAILABLE FOR CHRONIC EFFECTS OF OVEREXPOSURE.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:INHALATION-GASPING. DO NOT BREATHE THE DUST.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:IN CASE OF EYE CONTACT, FLUSH WITH PLENTY OF WATER.

Fire Fighting

Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICALS.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:TONER MATERIAL, LIKE MOST ORGANIC
MATERIAL IN POWDER FORM, IS CAPABLE OF CREATING DUST EXPLOSIONS.

Accidental Release

Spill Release Procedures:NO TONER SPILLAGE OCCURS IN NORMAL OPERATION
OF HANDLING. IF IT SHOULD OCCUR, AVOID INHALATION OF THE DUST.
SWEEP MATERIAL ONTO PAPER/PLACE IN FIBER CARTON. PACKAGE
APPROPIATELY FOR SAFE FEED TO AN IN CINERATOR/DISSOLVE IN LIKE
WASTE PRIOR TO BURNING.

Handling

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:NONE REQUIRED.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE REQUIRED.
Eye Protection:NONE REQUIRED.
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:100-150C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4-1.5
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TONER IS POWDER WITH SLIGHT PLASTIC.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS WITH ANY ORGANIC MATERIAL,
COMBUSTION WILL PRODUCE CARBON DIOXIDE AND PROBABLY CARBON
MONOXIDE.

Disposal

Waste Disposal Methods:DISPOSE IN AN APPROPIATE INCINERATOR OR CONTRACT
WITH LICENSED DISPOSAL AGENCY. DISPOSAL MAY BE SUBJECT TO FEDERAL,
STATE OR LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.